Cleaned and painted as well. To put a ’96 4l60e into a ’95 car: The ’95 tailshaft housing and vss must be installed on the ’96 4l60e before the trans can be bolted into the car. But is there anything else at all i. Since the 4l60e mount points are approximately 2. 5inches farther back on the case and no one i can find sells a ls swap cross member for a 700r4;
I have a 4l60e trans from a 2002 ta ws6 that is missing a tail shaft housing. I plan on useing it in a ls swap into a foxbody mustang. i'm not very familiar with this transmission but i know. I have somehow gotten a crack in 4l60e bellhousing. It is in my 96 gmc 1500 4x4 5. 7, but i had to change the tranny out of a 98 tahoe 4x4 some time ago due to cracks. I ended up constructing a tail shaft housing trans mout that bolts to the horizontal cross member bolts on the 4l60e, and on the top of the case at the rear. It triangulates to a c. One of these areas are transfer case / transmission adaptability. It basically takes your stock jeep np231 and puts a 27. This means you must shorten.
